"007" - Pre-1967 Big Block Engine w/o A/C - £45.00 plus postage and packing Per Kit

Fits water pumps with casting numbers 2205 862, 2468 007, & 2536 767.

Use heater hose support "V"

          

______________________________________________

"987" - 1967-1974 Big Block Engine w/o A/C - £45.00 plus postage and packing Per Kit

Fits water pumps with casting numbers 2780 987 & 3698 468.

Use heater hose support "A"

          

____________________________________________

"007H" - Pre-1967 426ci Hemi Engine - £45.00 plus postage and packing Per Kit

Fits water pumps with casting numbers 2205 862, 2468 007, & 2536 767.

Use heater hose support "V"

          

_______________________________________

"987H" - 1967-1971 426ci Hemi Engine - £49.00 plus postage and packing Per Kit

Fits water pumps with casting numbers 2780 987 & 3698 468.

Use heater hose support "A"

          

________________________________________

"794" - 1967-1969 Small Block Engine - £42.00 plus postage and packing Per Kit



Fits cast iron water pumps with casting numbers 2402 794 & 2863 067.

Use heater hose support "AX43"

_________________________________________

"795" - 1970 & Later Small Block Engine - £42.00 plus postage and packing Per Kit



Fits aluminium water pump with part number 3420 037.

Use heater hose support "AX43"

_____________________________________________

"AX41" - (1) Required - £7.00 Each plus postage and packing

Wire retaining clip for the positive wire on the rear of the alternator.
________________________________________

"987S" - (1) Required - £10.50 Each plus postage and packing

Big Block non-A/C alternator adjusting strap. Dipped in black as original.
__________________________________________________

"987SH" - (1) Required - £10.50 Each plus postage and packing

1966-71 Hemi alternator adjusting strap. Dipped in black as original.
_________________________________________________________

"987B" - (1) Required - £10.50 Each plus postage and packing

Big Block non-A/C alternator mounting bolt and spacers. Comes complete with thick 3/8" washer, three spacers, and a 6" bolt.
_________________________________________________

"987BH" - (1) Required - £11.50 Each plus postage and packing

1966-71 Hemi alternator mounting bolt and spacers. Comes complete with thick 3/8" washer, three spacers, and a 6"long bolt.
__________________________________________________________

"794B" - (1) Required - £10.50 Each plus postage and packing

Pre-1970 Small Block alternator mounting bolt and spacers. Comes complete with thick 3/8" washer, three spacers, and a 5" long bolt.

_________________________________________________________

"795B" - (1) Required - £10.50 Each plus postage and packing

1970 & later Small Block alternator mounting bolt and spacers. Comes complete with thick 3/8" washer, two spacers, and a 5 1/2" long bolt.


All alternator bracket kits are reproduced to OEM standards with the correct length bolts & thick flat washer, and three spacers for a complete seven piece kit (except for six piece late small block kit). Hemi kits contain special spacers and adjusting bracket. Triangle and adjusting bracket dipped in black as original. Partial kits are available upon request.

Prices for parts NOT listed as IN STOCK are subject to change and will be confirmed at the time of placing order.

Delivery of items IN STOCK is 1 to 4 days depending on weight, delivery of items not in stock will be confirmed at time of placing order.

To enquire about or purchase any of the above parts please go to the order form/spec sheet on the FBO Products page and fill in any relevant information or email/telephone us with your specific requirements.