| USA Imports home page |
Barry Grant Carburation and Fuel Systems, FBO Systems Fuel and Intake Products, Pro-Formance Braided Stainless Steel Dual Inlet Kits, Billet Aluminium Fuel Filters.
Barry Grant Demon Carbs
Why put up with a Holley Carburettor which is basically a 40 year old design? step into the 21st century with a Demon, built on the basic design of a Holley but with all the negative aspects improved on.
Why buy a carburettor off the shelf from a parts house and then spend hours on the phone trying to find a solution to make it run right?
Demon Carburettors bought from us are base lined and set up by Don Gould of FBO Systems in the states for your specific vehicle and application. What you will end up with is a carb that is plug and play and WILL do what you want it to do.
|
|
ROAD DEMON |
|
|
SPEED DEMON 1282010 650
£310.00 to £340.00 |
|
|
MIGHTY DEMON 240* @ 50 Cam Duration, 5282010GC 650 Mighty Demon From £380.00 Telephone 01530 450533 or email Neil and Jo for more information and prices for your application |
|
|
RACE ONLY Telephone 01530 450533 or email Neil and Jo for more information and prices for your application
|
|
|
ULTIMATE PERFORMANCE Telephone 01530 450533 or email Neil and Jo for more information and prices for your application
|
|
Prices subject to change and will be confirmed at time of placing order |
|
Tuning help is just a part of the service offered with every carb we sell. Don Gould at FBO SYSTEMS is personally available to walk you through the installation and tuning process most days and even on most weekends unless he is racing.
He will re-jet your new Demon to extreme altitudes before it leaves his shop at NO Charge.
We also have available a small jet kit that will give you 16 jets, 2 up and 2 down Primary and Secondary and specific to your carb.
Power valve not correct?...No problem, send us your manifold vacuum reading and we will get the P/V changed before we ship the carb...NO CHARGE.
FBO SYSTEMS do a complete pre-delivery inspection and adjusts the 4 corner bleeds to a baseline that they determine from experience and your engine specifications, set the accelerator pumps, preset the idle speed screws, re-jet to extreme altitudes, preset and square the floats, test and inspect all the anti siphon circuits, check all the fuel circuits, check every screw and bolt for correct torque.
This set-up and inspection service is £20.00 for any Demon carburettor, it takes FBO SYSTEMS about 1 hour to strip it down to the main body and complete the inspection and set-up. If you opt for this additional service we will be more than happy to assist you with tuning your carburettor which should be very simple with only a couple of minor adjustments to fine tune it to your engine requirements.
Please do not opt for the "Out of the Box" and then expect FBO SYSTEMS to spend 2-3 hours on the phone with you trying to tune the carb, call the factory, sit on Hold, leave a message and they will get back to you in a couple of days. Possibly even with the right information, good luck.
We're almost always willing to help you with any tuning issues on any Demon carburettor whether you purchased it from us or not. If you have a tuning issue please complete our Order Form/Spec Sheet and send it to us, we will reply asap. Be sure to say you have a tuning issue and we'll go over your combination and get you going in the right direction.
Thank You, we are out to "Earn your business"
Barry Grant Fuel Pumps
|
|
The BG220HR is ideal for fuel delivery with a nitrous assisted system. Based on the BG220PS pump this pump includes a separate diaphragm bypass that mounts at the carburettor to return unneeded fuel to the cell allowing the pump to operate at cooler temperatures. Requires a 10 -AN return line. Includes the Barry Grant Fuel System's Lifetime Labour warranty. USA Imports Price: £190.00 plus postage and packing |
|
|
The BG280 electric fuel pump is ideal for drag vehicles and other short duration to 650HP. Based on the large BG400-2 model, this pump flows over 280 gph and is preset at 20 psi. Internal bypass prevents pump cavitation. Includes the Barry Grant Fuel System's Lifetime Labour warranty. USA Imports Price: £230.00 plus postage and packing |
|
|
The BG400 is designed for high volume delivery or other short duration competition. HP to 800+. An externally adjustable bypass (16-25psi) allows pressure to be set at the pump. Requires - 8 AN return line to cell Includes the Barry Grant Fuel System's Lifetime Labour warranty USA Imports Price: £310.00 plus postage and packing |
|
|
The BG220RR is designed for continuous duty i.e. street car and will support up to 500 HP Includes the Barry Grant Fuel System's Lifetime Labour warranty
USA Imports Price: £210.00 plus postage and packing |
|
|
The BG Mighty Enduro is suitable for all applications up to 750 HP
USA Imports Price: £381.00 plus postage and packing |
Fuel pumps can be supplied as a complete kit including all fittings at a discounted price, please contact us for a quote.
Barry Grant 2 Port Plus + Fuel Pressure Regulator
|
|
Barry Grant 2 Port Plus + Fuel Pressure Regulator Factory pre-set at 7psi Ideal for use with BG280
pump/BG5000 fuel filter up to 650hp race USA Imports Price: £63.74 plus postage and packing - In Stock |
Barry Grant Fuel Filters
|
|
BG5000 Fuel Filter The new BG5000 fuel filter with replaceable filter element is now lighter and more compact than ever. With threaded end caps, it is also more easily serviced and filters to 9 -microns with virtually no loss in flow volume - not even when used in conjunction with the super high-volume fuel pumps. the filter can be used with gasoline, alcohol or nitro with positive O-ring sealing. Replaceable O-rings are available separately. Uses -10AN fittings. USA Imports Price: £65.11 plus postage and packing |
Precision Performance Fuel Filters
|
|
|
||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||
|
|
Pro-Formance Dual Inlet Kit
Available For Demon and Holley Carbs USA Imports Price: Holley £42.00 IN STOCK
order code 06/DDFK |
|
FBO Systems Carb Spacer
|
|
FBO billet aluminium 4 hole carb spacer kit 1/2" billet spacer with 2 exclusive .188 Aramid fibre 4 hole gaskets includes 4 studs, 4 nuts and 4 washers USA Imports Price:
£50.00 plus postage and packing
IN STOCK |
FBO Systems Hi-Rise Throttle Brackets
|
|
FBO Hi-Rise throttle Brackets Mopar small block Mopar big block Mopar B engine Magnum heads Victor 440 |
Throttle cable mounts easily, adapts to Edelbrock, Holley or Demon carbs. Takes the bind out of your throttle linkage and allows easy access for adjustment and throttle travel. All components are precision bent and machined and chrome plated for good locks for years to come. Specify big block or small block. |
|
USA Imports Price: £33.00 plus postage and packing IN STOCK |
||
Lokar Mopar Trans Kickdown Cables
|
|
Lokar Mopar transmission Kickdown Cable Eliminates the rigid steel kickdown linkage when using high rise inlet manifolds Fully adjustable
USA Imports Price: £40.00 plus postage and
packing |
FBO Systems Demon to Mopar Adaptors
|
|
FBO Demon to Mopar Adaptors Adapts the Mopar throttle/kickdown linkage to accept the Demon range of carbs USA Imports Price:
£11.00 plus postage and packing |
FBO Systems Extra Long Carb Stud Kit
|
Image not yet available |
FBO Extra Long Stud Kit Allows the use of under carb spacers USA Imports Price: £5.00 plus postage and packing |
FBO Systems Air Control Spacers
|
Image not yet available |
FBO Air Control Spacers Fully tuneable with a screwdriver to bleed air under the throttle plates No need to drill holes in the throttle plates USA Imports Price: £65.00 plus postage and packing |
FBO Systems 4 Hole Carb Spacer Gaskets
|
Image not yet available |
FBO .188 4 Hole Carb Spacer Gasket Exclusive .188 Aramid fibre USA Imports Price: £4.50 plus postage and packing |
Pricing for parts NOT listed as IN STOCK is subject to change and will be confirmed at the time of placing order.
Delivery of items IN STOCK is 1 to 4 days depending on weight, delivery of items not in stock will be confirmed at time of placing order.
To purchase any of the above parts please go to the order form/spec sheet on the FBO Products page and fill in any relevant information or email/telephone us with your specific requirements.
Aluminium Fuel Tanks
The following fuel tanks are not in stock with USA Imports in the UK at present and will be shipped directly from FBO Systems, please contact us via the order form or email for prices.
|
|
All Tig welded construction .080 aluminium, 11 gallons as shown, custom sizes available, 24" diameter x 7" high with 11" flat on rear Internal baffles Designed to fit inside the spare tyre storage on many early muscle cars 1/2" NPT bungs Aircraft style snap lock filler cap 3/8" NPT vent fitting NPT to AN adaptors included All Tig welds ground smooth Raw mill or swirl finish |
|
|
FBO hand crafted spare tyre well aluminium fuel cell |
|
|
FBO new stock replacement tanks with drop sump Most early A and B body Mopar's Most Camaro's 1968 to 1988 Most mid sized Chevy's, Pontiac's 1968 to 1988 Most Mustang's 1964 to 1994 Moroso deep sump All Tig welded modifications Correct feed modifications 1/2" NPT outlets for big demand fuel systems 72 Roadrunner shown, please see FBO site www.4secondsflat.com for more info |
Moroso Fuel Tank Sump
|
|
Moroso Deep Sump as above supplied as a do it yourself kit USA Imports Price: £55.00 plus postage and packing |
Lokar Universal Throttle Cables: USA Imports Price: £30.33
Prices for parts NOT listed as IN STOCK are subject to change and will be confirmed at the time of placing order.
Delivery of items IN STOCK is 1 to 4 days depending on weight, delivery of items not in stock will be confirmed at time of placing order.
To enquire about or purchase any of the above parts please go to the order form/spec sheet on the FBO Products page and fill in any relevant information or email/telephone us with your specific requirements.