Aluminium Spanner HoseLocks™
HoseLocks™ is a billet aluminium compression fitting that replaces conventional automotive hose clamps, dramatically improving engine compartment appearance and offering superior sealing performance. Designed to be used for fluid and vacuum systems, on rubber or steel braided line, HoseLocks™ are available polished or anodized in various colours and sized between 1/4 inch to 2 inches and metric, sizes 28mm-32mm.
Use the schematic drawing below and the following table to determine part numbers for your application. The corresponding wrenches listed are sold in pairs (2), separate from the fittings. If you have any questions regarding selection, please feel free to call and we will assist you. Also see our 'How to Measure' link to get more information.
HoseLocks™ are available in polished, red and blue.
NOTE:
(Prices are for polished, Red & Blue only add an additional 10% for anodized colors )
Vacuum - Fuel - PCV HoseLocks™
| Part # | Size (Hose I.D.) | Max Hose O.D. Installed | Minimum Compression Range | Dim B | Dim C | Wrench Part # |
| 1A-04S* | 1/4 | .475 | .375 | 1.030 | .680 | 100406 |
| 1A-04 | 1/4 | .540 | .446 | 1.060 | .740 | 100406 |
| 1A-05 | 5/16 | .635 | .550 | 1.110 | .850 | 100406 |
| 1A-06 | 3/8 | .675 | .565 | 1.145 | .895 | 100406 |
| 1A-07 | 7/16 | .745 | .660 | 1.170 | .960 | 100712 |
| 1A-08 | 1/2 | .830 | .710 | 1.300 | 1.090 | 100712 |
* S=Silicon (for smaller diameter)
Heater HoseLocks™
| Part # | Size (Hose I.D.) | Max Hose O.D. Installed | Minimum Compression Range | Dim B | Dim C | Wrench Part# |
| 1A-09 | 9/16 | .920 | .810 | 1.400 | 1.200 | 100712 |
| 1A-10 | 5/8 | .985 | .895 | 1.440 | 1.250 | 100712 |
| 1A-11 | 11/16 | 1.050 | .918 | 1.260 | 1.345 | 100712 |
| 1A-12 | 3/4 | 1.100 | .970 | 1.460 | 1.350 | 100712 |
| 1A-14 | 7/8 | 1.250 | 1.120 | 1.400 | 1.600 | 101319 |
| 1A-15 | 15/16 | 1.360 | 1.200 | 1.357 | 1.750 | 101319 |
Radiator HoseLocks™
| Part # | Size (Hose I.D.) | Max Hose O.D. Installed | Minimum Compression Range | Dim B | Dim C | Wrench Part # |
| 1A-16 | 1 | 1.450 | 1.360 | 1.770 | 1.880 | 101319 |
| 1A-19 | 1 3/16 | 1.560 | 1.335 | 1.665 | 1.990 | 101319 |
| 1A-20 | 1 1/4 | 1.735 | 1.550 | 2.225 | 2.170 | 102032 |
| 1A-21 | 1 5/16 | 1.735 | 1.560 | 2.225 | 2.170 | 102032 |
| 1A-22 | 1 3/8 | 1.830 | 1.640 | 1.650 | 2.150 | 102032 |
| 1A-23 | 1 7/16 | 1.900 | 1.770 | 1.690 | 2.300 | 102032 |
| 1A-24 | 1 1/2 | 1.995 | 1.800 | 2.290 | 2.460 | 102032 |
| 1A-24N* | 1 1/2 | 2.000 | 1.800 | 1.420 | 2.460 | 102032 |
| 1A-28 | 1 3/4 | 2.275 | 2.100 | 2.330 | 2.745 | 102032 |
| 1A-28N* | 1 3/4 | 2.185 | 2.100 | 1.500 | 2.745 | 102032 |
| 2A-24 | 1 1/2 | 2.000 | 1.000 | 2.225 | 2.460 | 102032 |
| 2A-28 | 1 3/4 | 2.200 | 2.000 | 2.225 | 2.745 | 102032 |
| 1A-32 | 2 | 2.460 | 2.315 | 2.340 | 2.925 | 102032 |
* N = Narrow
___________________________________________________________________
Metric Aluminum Spanner HoseLocks™
|
|
| Part # | Size (Hose I.D.) | Max Hose O.D. Installed | Minimum Compression Range | Dim B | Dim C | Wrench Part # |
| 1A-28mm | 28mm | 39.11mm | 34.93mm | 41.50mm | 50.50mm | 100319 |
| 1A-31mm | 31mm | 41.14mm | 37.48mm | 43.50mm | 50.50mm | 100319 |
| 1A-32mm | 32mm | 44.07mm | 39.67mm | 2.230mm | 2.170mm | 100319 |
Vacuum Sleeves and T's
Vacuum Sleeves HoseLocks™
| Part # | Size (Hose O.D.) |
| VL-215 | .215 |
| VL-225 | .225 |
| VL-355 | .355 |
| VL-385 | .385 |
| VL-415 | .415 |
| VL-445 | .445 |
| VL-475 | .475 |
| VL-500 | .500 |
| VL-525 | .525 |
Billet Vacuum Splice
| Part # | Size (Hose I.D.) |
| VS-1225 | (1/8-1/4) |
| VS-1825 | (3/16-1/4) |
| VS-253 | (1/4-5/16) |
| VS-1212 | (1/8-1/8) |
| VS-1818 | (3/16-3/16) |
| VS-2525 | (1/4-1/4) |
| VS-3131 | (5/16-5/16) |
Billet Vacuum T's
| Part # | Size (Nipple O.D.) |
| VT-.125 | (1/8) |
| VT-.188 | (3/16) |
| VT-.250 | (1/4) |
| VT-.313 | (5/16) |
PI_THON Hose Clamps
Complete Kits
Induction locks
Firelocks
Tech