USA Imports Home Page
TCS Performance Parts

 

727 Torqueflite 4.2 Ratio Band Lever

bulletProvides greater mechanical clamping force than the 3.8 Ratio Lever
bulletCNC Machined from 4140 Heat Treated HTSR - for added strength

Part # 146900

727 Aluminium Front Clutch Drum Kit

Would you rather replace a complete drum or, a Bushing/Sleeve assembly? This drum is designed with a replaceable sleeve to reduce potential repair costs.

bulletMade from T6 Aluminium
bulletIncludes a NEW steel pressure plate, Teflon Sealing Rings and a NEW T6 Aluminium Piston
bulletSAFER than OEM cast iron drums
bullet57% LIGHTER!! Than the OEM Drum - 3 1/4lbs versus 7.5lbs
bulletWill hold up to 6 FRICTION PLATES versus 4 in a stock unit
bulletDesigned with a SERVICEABLE & REPLACEABLE Ring Sleeve & Bushing

Part # K123900

727 Steel Drum

Billet Steel Front Drum
 

bulletMade from solid billet steel - not cast iron
bulletHolds up to 5 friction plates
bulletKit contains a new billet Aluminium Piston and new pressure plate
bulletDual apply feed passages
bulletSafer than a Cast Iron Drum and longer lasting than the Aluminium drum, an ideal choice for street use

Part # K123900S

 727 Oil Pan Kit

A High Volume Oil Pan - 27% more oil capacity than a stock pan
 
bulletBright - Zinc Bronze Chromate Coated Oil Pan
bulletKit includes the following; One - Farpak oil pan gasket, One - Washable Brass High Flow Oil Filter.
bulletAnd, One - Filter Extension with bolts and washers - to position the filter closer to the bottom of the pan.
bulletAnd - there's more! Two - O-Rings (one spare, just in case), and one Magnet to collect miscellaneous fine transmission particles.

Part # K128000S

Torqueflite 727 Rear Drum

Take a load off your transmission with this new Billet Aluminium Rear Drum
 

bulletMade from Solid T6 Billet Aluminium
bullet60% lighter than the stock Rear Drum - 1.45lbs versus 3.65lbs
bulletA direct replacement for the stock drum
bulletIdeal for both Street and Strip

Part # 123901

Torqueflite 727 Sun Shell

Lightened Reaction Sun Shell
 
bulletFor the serious enthusiast looking to reduce every possible ounce of weight from the transmission
bullet2.85lbs versus the 3.75 lb stock unit. Almost 1lb of weight reduction
bulletGold Dichromate Plated - to look just like the Sun!

Part # 121450

 Transmission Pressure Gauge Kit

A transmission Pressure Gauge Kit is a necessity for any Performance Race Transmission. Once you have installed this gauge you will always know where your transmissions operating Mainline Pressure is before you stage your car. This helpful tool will avoid the possibility of premature transmission failures caused due to inadequate pressure.
Oil pressure gauges are not just for your engine
 

bulletOne Auto-Meter Liquid filled gauge (0 – 300psi)
bulletTwo coupling connectors
bulletOne 6’ length of Braided oil line

Part # PGK300

The BIG DADDY - 727 TF Drum & X-Large Piston

Torqueflite Billet Steel Front Drum and X-Large Piston
 

bulletDrum CNC Machined from C1040 Solid Steel - NO Cast Iron used in this one!
bulletWill hold 5 - 6 friction Plates
bullet55%, YES that's 55% MORE Piston Apply Area! This results in double the Clamping Force needed in Third Gear - Just what you need when used in High Performance and Extreme Applications
bulletEngineered with Dual Oil Apply Passages for even Piston Apply

Part # K123900SH

Torqueflite 727 Input Shaft & Hub

Designed for those higher horsepower engines, this performance product has been tested to 1,400 ft/lbs of torque
 

bulletShaft is machined from 300 Maraging AMS 6514 material then Heat Treated for torsional strength and precision ground on all critical diameters
bulletHub has been machined from 4140 HTSR steel and Nitride Heat Treated for additional durability
bulletShaft to Hub splines increased from 28 to 35 for 25% more surface contact

Part # 129600

 

FBO/A&A

727/904 Race Manual Reverse Pattern Valve Body with Low Band Apply 66-80

This reverse pattern valve body features the low-band on in 1st gear so it gives 1st gear braking and extra sprag protection. It is ideal for many applications.

Additional Information:
This valve body requires a low-rev. billet piston kit
727 Kit
904 Kit

Full list of parts we can supply with prices can be viewed in the Parts list page

For any queries or more  information please contact us by email Neil and Jo or telephone Neil on 01530 450533

727 904 Powerglide Specialised Tools Other TCS Products Parts List


 

Home Page

About Us

  Pickups

Dodge Ram Parts and Accessories

Parts

FBO Systems

  Mopar Tech

Dodge Ram Tech

Links

OBDII

  TCS Performance Parts

Kenlowe Products

      Cometic     PI_THON

Miscellaneous

Site Map

  Terms & Conditions

Contact Us