Powerglide

USA Imports Home Page
TCS Performance Parts

Powerglide Steel Clutch Drum

	Manufactured by TCS, this unit offers greater clutch performance.
	Can hold up to 9 ALTO Red Eagle^® Clutch Plates - 15% more Clutch Area if the Powerglide Extra Short Clutch Piston and Hub have been used.
	Assembly includes - TCS PG Steel Clutch Hub, TCS PG Aluminium Clutch Piston, and 9 ALTO Red Eagle^® Clutch Plates and Steels.

Part # 743920S, Assembly Part # K743920S
This unit is also sold as a complete assembly (see below)

Powerglide Clutch Drum Kit

Complete 9 Friction assembly kit for Powerglide Clutch Drum

	Assembly holds 9 ALTO Red Eagle^® Clutch Plates - 15% greater clutch area than 7&8 plate clutch packs
	Clutch Piston made from solid machined aluminium
	Drum Assembly is ALL STEEL, not cast iron as in the stock assembly and will accommodate up to 1,600 HP Engines
	Kit contains; a Steel (not Cast) Clutch Drum, new Steel Clutch Hub, new Extra Short Aluminium Clutch Piston, all Clutch Plates, Steels, springs and retainers
	Competitively priced to give your true value.
	Don't settle for imitations, TCS were the first to come out with a STEEL Billet Drum, STEEL not Cast!

Part# K743920S

PG Aluminium High Gear Clutch Drum Kit

Powerglide Aluminium Drum Kit - THE NEXT GENERATION OF HIGH PERFORMANCE DRUMS!

	2nd GENERATION Powerglide T6 Aluminium High Gear Clutch Drum Kit
	Kit Includes a "spare" Replaceable 660 Bearing Bronze Bushing and Sealing Ring with a "special" SPIRAL LUBE Channel
	Machined from T6 Solid Aluminium
	Kit also includes a NEW Billet Piston made from 6061-T6 Aluminium with Anti-Spin Tabs designed into the piston. The EXTRA SHORT Piston allows the use of 9 CLUTCHES!
	The complete assembly weighs only 3 lbs

Part # K743920A

Powerglide Clutch Hub

	Manufactured from Heat Treated Bar Stock
	Oil Relief holes have been slotted to reduce rotational weight
	Manufactured to accommodate 1,200 HP engines
	When used in combination with the TCS High Output Clutch Drum Piston, the hub will accept 9 Alto Red Eagle^® plates for 15% more clutch Area!
	Or use any combination of regular or Raybestos^® Blue Plates
	Will retro fit to stock Powerglide drum and accept up to 8 Alto Red Eagle^® plates.

Part # 748300S

Powerglide Clutch Piston

	The Extra Short Clutch Piston has been designed to be used only with a TCS PG Clutch Drum and Hub Assembly
	Solid machined Aluminium construction
	Lighter than conventional PG Clutch Pistons

Part # 744000P - Standard Piston
Part # 744000PS - Extra Short Piston

PG Hardened Input Shaft

Powerglide Turbo Spline Input Shaft

	CNC Precision Machined from 300 Maraging Alloy Steel - the same steel used for Aircraft Landing gear
	Extra large Radius's machined in all possible High Fracture areas.
	Note: The "Ringless" Design is NOT recommended for race applications where the Lube Circuit cannot be sacrificed.

Product Part Number: 749601

Powerglide Output Shaft Support

TCS' Output Shaft Support helps to eliminate unwanted weight and reduces rotational friction by replacing the traditional bushing style governor support with a light weight aluminium unit fitted with a needle bearing. The TCS Support has been designed for race applications, we've added colour, because if it works this good -- we thought it should look good too!

The Output Shaft Support is 53% lighter than the stock unit (1.1 lbs. versus 2.35 lbs.)

Part # 720005

Super Pump For Powerglide Transmissions

	All aluminium construction
	All Pump Bodies are Hard Coat Anodized for longer life
	20% Lighter than the stock pump (11.5 lbs versus 14.4 lbs)
	Positive Stop Bushing area (prevents bushing from moving forward)
	Area for Staking Bushing (will not rotate)
	Snap Ring to prevent seal blow out
	Lube reliefs on outer gear pocket provides superior lubrication
	Since it's made from solid heat treated bar stock, the shaft will never spin out as often happens with stock or other stator designs

Part # 743400PH

Parts list:
Snap Ring (WH-314); Pump Bushing (8005); Pump Gasket (3762L); Stator Shaft Bushing (34002); End Play Shim Kit (7434-2); Pump Bolt Sealing Washers (3601SL); Pump Seal (44526); Pump O-Ring (3808L); Gear Set - 0.721 Thou. Thick (K44965); Stator Body O-Ring Kit (7434-1); Stator Shaft Bearing (52421); Sealing Ring (8200T)

Powerglide NEW Aluminium High Volume Pump Body & Gears

CNC machined from 7075-T6 solid bar stock this High Volume Pump Body & Gear Set is the finest on the market today.

	Superior Trans Brake holding at LOWER RPM's
	100% Bolt-In, NO modifications required
	Safety Features Include: Front Seal Snap Ring, Posi-lock Bushing Lip and Pockets to stop possible Bushing Spin-Out
	Added lubrication pockets on outer gear area
	A low drag/low volume output version is also available - call for details and pricing.
	This pump body is BRAND NEW - not a refurbished part!

Part # 743400B

PG Racing Band

An "Extra" Wide Band designed for Racing

	17% greater clutch band surface
	High Pressure Red Race Lining

Part # 625101W

Powerglide Short Housing with Bearing

	Manufactured from solid T6061-T6 Aluminium
	Needle Bearing
	Includes Gasket, all bolts and washers
	Will retrofit to all Powerglide transmission cases

Part # 746401

PG Trans Prep Kit

Transmission re-builders supplement kit

	All of the components needed when you do that re-build
	Bright Zinc Bronze Chromate Coated
	Used with aftermarket cases from Dedenbaer or J.W. Performance

Part # K740000

Powerglide Dual Steel or Teflon Sealing Ring Servo Piston

In this crucial area, the case bore must be in good condition, otherwise, leakage can occur resulting in band failure. We use solid 6061-T6 Aluminium to eliminate any possibility of leakage that may be caused by holes that can occur in servo pistons that are made from aluminium castings.

	Manufactured from solid bar stock
	Consistent sizing for better seal
	Dual rings prevent leakage and prolongs band life
	Fits all Powerglide stock or aftermarket cases
	Part # 723001 - Teflon Ring

Part # 723001S - Steel Ring

Powerglide Super Transbrake Solenoid

Powerglide Transbrake Solenoid - can be used with most popular Transbrakes. One of the fastest releasing solenoids available on the market today. Product includes a complementary installation wrench.

	One piece Aluminium housing
	Wires can be positioned on top to prevent oil leaks
	Totally re-buildable, all components can be re-ordered separately
	O-ring sealed solenoid to case
	Spring assisted release
	Draws 14.5 Amps

Part # 749809S

Powerglide Servo Cover

	A nice "dress-up" item for your Powerglide
	Made from solid 6061-T6 Aluminium
	Kit includes gasket and bolts
	Lighter than the stock servo cover
	Part # 728000 - Aluminium

Part # 728000B - Black Anodized

Pressure Gauge available for all transmissions click here

Full list of parts we can supply with prices can be viewed in the parts list page

For any queries or more information please contact us by email Neil and Jo or telephone Neil on 01530 450533

Home Page	About Us	Pickups	Dodge Ram Parts and Accessories
Parts	FBO Systems	Mopar Tech	Dodge Ram Tech
Links	OBDII	TCS Performance Parts	Kenlowe Products
Cometic	PI_THON	Miscellaneous	Site Map
Terms & Conditions	Contact Us